How to Implement Cisco ISE in Your Network – Complete Guide

0

Cisco ISE is a powerful Network Access Control (NAC) solution that lets you manage and secure your network using multiple methods, including 802.1X authentication to authenticate clients against wired or company wireless; posture assessment that helps detect dangerous devices on the system before they can be exploited by malware, etc., guest access allowing visitors from outside sources to access only authorized areas with the information appropriate identification. Cisco ISE The training will show you how to configure and implement this powerful solution in your network. In this article, we will provide a comprehensive guide on how to implement Cisco ISE in your network.

Installing and Configuring Cisco ISE

In order to use all the features of your network, you must first install and configure Cisco ISE. The installation process is simple, with GUI or CLI options available for completion; after installing it on the computer system, you will need to configure some basic settings like adding devices to its inventory list (which helps us to identify any issues faster), setting authentication policies so that they can be used when needed within user groups, etc.

Adding devices

Before using Cisco ISE, you must add devices to the platform. This can be done by going to the “Device Management” section of the web interface and clicking on “Add Device”. You’ll then need to enter the IP address, hostname, and credentials for each device you want to add. Once you have added all devices, you need to create a device group. This can be done by going to the “Device Groups” section and clicking on “Add Device Group”. You will then need to enter a name for the group and add the devices you wish to include.

Creation of user groups

The next step in configuring Cisco ISE is to create user groups. This can be done by going to the “User Administration” section of the web interface and clicking on “Add User Group”. You will then need to enter a name for the group and add the users you wish to include. Once you have created the user group, you must assign an access policy. This can be done by going to the “Policies” section and clicking on “Add Policy”. You will then need to select the user group to which you want to apply the policy and choose the desired settings.

Configuring Authentication Policies

The final step in configuring Cisco ISE is to configure authentication policies. This can be done by going to the “Authentication” section of the web interface and clicking on “Add Policy”. You will then need to select the user group to which you want to apply the policy and choose the desired settings. Once you save the authentication policy, it will be enforced when users attempt to connect to the network.

Cisco ISE Testing and Troubleshooting

Once you have Cisco ISE configured, you will need to test it to make sure it is working properly. This can be done by connecting to the network and trying to authenticate. If you can authenticate successfully, then Cisco ISE is working properly. You will need to check the logs to troubleshoot if you cannot authenticate.

Now that you know how to install and configure Cisco ISE, it’s time to implement it in your network. The next step is to test and troubleshoot the system to make sure it is working properly. By following the steps in this guide, you should be able to get Cisco ISE running on your network without any issues.

Category: Local News, NEWS

Share.

Comments are closed.